Labels

Saturday, May 3, 2014

Ferrite, Cementite, Pearlite & Austenite

alpha-Iron is Ferrite
Fe3C - Cementite
Ferrite + Cementite is Pearlite
Gamma-phase Iron is Austenite

Graphite

  1. Used in Pencil making with a blend of clay.
  2. Used as solid lubricant or in a graphited oil 
  3. Has directional properties
  4. Thermal and electrical conductivity are much higher along the direction of sheet as compared to its perpendicular direction.
  5. Can be used as dry powder, as a spray, as a paste, as grease or as a liquid dispersion.
  6. Suitable for use at hight temperature and pressure because of its low coefficient of friction.
  7. Opaque
  8. Grey in color
  9. Also used in dry cells
  10. Moderator in nuclear reactor

Quality of a substance at saturated conditions


When a substance exists as part liquid and part vapor at saturation conditions, its quality (x) is defined as the ratio of the mass of the vapor to the total mass of both vapor and liquid.

Subcooled Liquid or Compressed Liquid


If the temperature of the liquid is lower than the saturation temperature for the existing pressure,it is called either a subcooled liquid (implying that the temperature is lower than the saturation temperature for the given pressure) or a compressed liquid (implying that the pressure is greater than the saturation pressure for the given temperature).

Moisture


The moisture content of a substance is the opposite of its quality. Moisture (M) is defined as the ratio of the mass of the liquid to the total mass of both liquid and vapor.

Saturated Vapor and Superheated Vapor


If a substance exists entirely as vapor at saturation temperature, it is called saturated vapor.

When the vapor is at a temperature greater than the saturation temperature, it is said to exist as superheated vapor.

Property Diagrams


Property Diagrams: The phases of a substance and the relationships between its properties are most commonly shown on property diagrams. There are six different types of commonly encountered property diagrams. These are: Pressure- Temperature (P-T) diagrams, Pressure-Specific Volume (P-ν) diagrams, Pressure-Enthalpy (P-h) diagrams, Enthalpy-Temperature (h-T) diagrams, Temperature-entropy (T-s) diagrams, and Enthalpy-Entropy (h-s) or Mollier diagrams.